Item Description
Description:Condition:100%Brand new and high qualityRated voltage range:220-240v~50HzOutput rated voltage :DC0-17VRated power input:10WOutput current:0.8ANo load speed:18000-20000RPMLoad speed:16000-18500RPMWeight:About 1.09Kg Operation:1:Press the power-supply'switch-and the indiator should power on -and the grinder is ready for operation2:press the switch in hand piece-the hand piece's power should be opened-and start to turn3:Turn the SPEED CONTRTOL clockwise slowly and the portable grinding head starts to turn and accelerate-until the max spleed4:Turn the SPEED CONTRTOL counterclockwise-to decelerate the grinding head5:The turning directions can be swapped;FWD means clockwise direction and REV means counterclockwise direction6:Adjust the speed of the grinding head within a reasonable range7:Press the switch to"O"status in hand piece -the piece'power should be closed-and stop to turn8:Press the power-supply'switch to "O"status-and the indicator should power off-and the grinder is stopped Warning:1:Don not change the turning directions to frequently-otherwise it will damage the grinding head2:Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to minimum before turing off and switch the main power supply "O"3:After operation-put the grinding head on the top of the main panel4:While the grinding head is in operation-never pull out the 5.5plug of the portable grinding head5:For long idle time-please disconnect the source power6:Any unauthorized disassembing of the product is prohibited -in case of any break down -pleasecontact the agent or authorized repair center-.we promise swift -high-quality and satisfactory sevice7:If the supply cord is damaged-it must be replaced by the manufacturer -its service agent or similarly qualified persons in order avoid a haza8:Chilren should be supervised to ensure that they do not play with appliance Package included:1 x Electric Nail Drill Main control1 x Handpiece1 x Handpiece Stand1 x 6 type basic bits set1 x User manual (in English)