Worldwide Free Shipping by Register Mail with tracking number!!!
nail art drill file machine, with full equipment, high efficiency and
stable performance, it's easy and safe to use.
Rotation up to 30,000 RPM.
Easy to use dialing speed control.
Forward and reverse operation switch.
Optional foot pedal for easy operation.
Low noise and vibration for smooth and long-time operation.
Improved hand piece cable ending design so that the cable will not loose out easily.
Improved hand piece holding area to prevent overheating during a long period of usage.
It can be used for natural as well as artificial nails.
For professional studio use or home use. Operation Details:
Plug in the electric cord of the transformer to the main electric outlet
Turn on the on/off switch on the transformer. (machine should be at the lowest speed when turning on)
Select the desired speed by turning the variable speed control knob on the transformer
The black switch in front of the transformer, next to the speed control
selection knob is for forward and reverse rotation direction
To use the foot pedal control, connect the end of the cord from the foot
pedal to the out put hole at the front of the transformer and press
down on the foot pedal
To secure the bits: push in the desired bit firmly into the hole at the
rotating head of the hand piece until the second lock click. (please
note the bit has to pass through)
To remove the bits: turn off the machine and gently pull the bit out Safety Rules:
Always unplug the tool when you change accessory or collets
Do not engage the shaft lock button while the tool is running
Do not use or place it near/in water. if motor falls into water, unplug it immediately.
Do not touch the bit after use. The bit is too hot to be touched by bare hands
Keep dust out of eyes and lungs by using protective eyewear or a dust mask
Always unplug it after use
When the machine is not in use, all tool must be stored in a dry place and keep out of the reach of children Specifications:
Input: 110V, 60Hz
Power input: 35W
Output voltage: DC1.25-18V
Output current: 2A
Plug standard: US plug
Package size: 24.5 * 20 * 10cm
Packed weight: 1641g Package Contents:
1 * Electric Nail Drill Machine : Main control + Handpiece
1 * Table Stand for handpiece
1 * Foot Pedal Power Control
6 * Optional Bits / Filing Heads (includes 1pc of emery rod with 4 sanding bands)
30 * Electric Nail File Drill Bits (With 3/32" (2.35mm) shank size)
50 * Sanding Bands with degree 80"
50 * Sanding Bands with degree 100"
50 * Sanding Bands with degree 120"
1 * Operation Manual