Wireless Remote Control Cord for Nikon D700 D3 D3X D2X​

Item Description

Compatible with (Not limited to below list):
Model N1 for --
Nikon F5/F6/F100/F90/F90X
Nikon D1/D1H/D1X/D2/D2H/D2X/D100/D200/D300/D300s/D700/D3/D3X,
Kodak DSC-14N, Kodak DSC-SLR/n,
Fujifilm S3 Pro, S5 Pro

What`s new with this Wire/Wireless Remote Control?
-Work as both wired and wireless remote control.
-The receiver works as a wired remote as well, even without the battery and transmitter.
-The receiver can be mounted on the hot shoe.
-New Built-in Two Seconds Delay mode.
Wirelessly Trigger Your Camera`s Shutter
-With the receiver connected to your camera`s remote control socket, you can press the button on the transmitter to trigger your camera`s shutter wirelessly!
Also Work as a Wired Remote Control
-The receiver alone can be used as a standard wired remote control, even without the battery and transmitter.
Two-Level Shutter Button, Autofocus, Continuous Drive & Bulb Mode Supported Too!
-The shutter buttons on the transmitter or receiver can be pressed halfway or all the way (half-press or full-press).
-You can activate autofocus, release shutter, activate continuous drive mode or keep the shutter open for bulb photography as well.

16 Channel with Working Distance of 100 Meters!
-Strong resistance to interference.
-There are 16 channels available so that you can switch to other channels to avoid jamming frequency.
-Maximum working distance is about 100 Meters in open area without blockage.

Able to Mount the Receiver on Hot Shoe
-The receiver can be mounted on the hot shoe, like a flash gun.
-If you need to use the hot shoe for your flash or spirit level, you can use the Free fastener tape to mount the receiver on your tripod.
Energy Saving Design, Long Working Hour
-With its low voltage and energy saving design, you don`t have to change the battery often.
-With a new battery, the receiver standby time is about 100 hours.
-With a new battery, the remote control can trigger about 1,000 times.

Avoid Camera Vibration=Sharper Pictures!
-Since you can trigger the shutter without touching the camera body, it can avoid camera vibration, thus resulting in sharper pictures.

How to Use?
With the shutter buttons on the transmitter and receiver, you can do the followings:
Autofocus:
-Half Press to activates autofocus.
Single Shot:
1. Switch the camera to single shot mode.
2. Full Press to release shutter and take pictures.
Continuous Drive:
1. Switch the camera to continuous drive mode.
2. Full Press and hold it to release shutter continuously.
Bulb Mode:
1. Switch the camera to Bulb mode.
2. Full Press for 3 seconds.
3. The receiver is in bulb mode now.
4. Press the button again to close the shutter.
Two Seconds Delay Mode:
1. Switch the camera to single shot mode.
2. Switch the transmitter to two seconds delay mode.
3. Full Press and the shutter will be release after 2 seconds.
Specifications: