Item Description

 

Dodge (Chrysler) 40RH, 42RH, 42RE, 44RE (A500) (A904) 30RH Deep Transmission Pan.

 


Volume: 2 qts. over stock

Dimensions: Click here for a PDF file with dimensions. A separate window will open and load the pdf file.

Number of Bolts: 14

This Dodge/Chrysler transmission pan works on these transmissions: 40RH, 42RH, 42RE, 44RE, A500. This pan can be used on the following vehicles:

  • 1994-2001 Dodge Ram 1500 with 3.9 V6
  • 1995-2003 Dodge Ram Van 1500 with 3.9 or 5.2
  • 1988-1994 Dodge Ram Van 150 with 3.9 or 5.2
  • 2000-2003 Dodge Dakota with 3.9 (4WD Dakotas will need to have cross member loosened to install pan)
  • 1987-1999 Dodge Dakota with 3.9 or 5.2 (4WD Dakotas will need to have cross member loosened to install pan)
  • 1998-2003 Dodge Durange with 3.9 or 5.2
  • 1999-2004 Jeep Grand Cherokee with 4.0 (may also have AW4 transmission)
  • 1993-1998 Jeep Grand Cherokee with 4.0 or 5.2 (may also have AW4 transmission and may have clearance issues with stock exhaust)
  • 1987-2001 Jeep Cherokee with 4.0 (may also have AW4 transmission and may have clearance issues with stock exhaust)
  • 1993-2002 Jeep Wrangler with 4.0 (may have clearance issues with stock exhaust and the frame crossmember)


Note to Jeep owners:

Jeep uses both Chrysler and Aisan Warner transmissions and routes the exhaust in a variety of ways. Take a close look at your existing transmission pan to verify that the shape of the pan perimeter and the bolt pattern are the same as the PML pan you intend to order. The AW pan is shaped like a long narrow rectangle. This Chrysler A500 pan has 14 bolts. Some Jeeps have the Chrysler 42RLE transmission which has 13 bolts.

This pan can also fit an A904 transmission (later called the 30RH). Dodge introduced this transmission in the 1960s and it is found in light duty applications.

Please check your vehicle to be sure you have room for a larger pan (reference pan dimensions). The exhaust system and frame cross members are the primary concerns.


On a 1998 Jeep Grand Cherokee 4.0, the customer moved the part of the exhaust that conflicted with the pan.
Pan and exhaust on a Grand Cherokee Pan and moved exhaust PML transmission pan installed on a Jeep Grand Cherokee

The pan has cast-in baffles to reduce sloshing, and a boss that can be drilled and tapped for a temperature sensor.

Transmission Pan Features

  • Increased oil capacity for cooler temperatures
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided
Gasket and filter not included (use stock parts).

THIS PAN WILL NOT FIT THE MA904 (BABY 904) USED IN COLTS, ARROWS AND SOME MITSUBISHI PICK-UPS!!!!

DUE TO THE HIGH DEMAND OF THESE PANS THERE MAY BE A ONE TO THREE WEEK BACKORDER, SO PLEASE CALL OR EMAIL PRIOR TO YOUR PURCHASE TO CHECK STOCK. THANK YOU!!!