WE COMBINE SHIPPING, S0 CHECK OUT OUR OTHER ITEMS....
ATTENTION, NOTE FROM SELLER: THE UNIT IN THE PIC'S IS SOLD, BUT WE HAVE ANOTHER JUST AS NICE. WE WILL BE THE PIC'S SHORTLY. IF YOU BUY BEFORE WE UPDATE THE PIC'S, WE WILL SEND YOU THE UPDATED PICTURES BEFORE WE SHIP THE UNIT AND IF YOU FEEL IT IS NOT AS NICE AS THE ONE IN THESE PIC'S WE WILL CANCEL THE SALE WITH NO NEGATIVE FEEDBACK.
FREE SHIPPING AND PALLETIZING (and a 3rd die head) IF "BUY-IT-NOW" IS USED (a $900.00 value)! THIS IS WITHIN THE 48 STATES (and some parts of Canada), TO A BUSINESS WITH A DOCK OR FORKLIFT FOR UNLOADING! OR, TO A SHIPPING TERMINAL NEAR YOU!
THIS IS "USED" 120 VOLT RIDGID 1224, BUT IT'S IN "VERY GOOD TO EXCELLANT" CONDITION! IT COMES WITH A SET OF 2 DIE HEADS AND 3 SETS OF DIES! A 711 SELF-OPENING DIE HEAD LOADED WITH A SET OF 1"-2" DIES (ATTENTION... SPECIAL... if "BUY-IT-NOW" is used you will get a 2nd 711 die head FREE for the 2nd set of dies, not shown it pic's, but you will get it), A SET OF NEW 1/2"-3/4" DIES, AND A 714 DIE HEAD WITH A SET OF 2-1/2"-4" DIES. BOTH DIES HEADS ARE RECEDING, WITH A THROUGH THE HEAD OILING SYSTEM (this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done, the die head automatically opens, so you can back off the carriage without having to reverse the threader or open the die head manually! This saves a full step and probably cuts the time to thread a pipe by 25%!), IT ALSO HAS A ROLLING STAND WITH A STORAGE TRAY (We can replace the tray with a plastic cabinet for an additional $100.00). A OPERATORS MANUAL IS INCLUDED , AS WELL AS A BLOW-UP/PARTS LIST!
THIS IS A VERY NICE THREADER! ALL DIE TEETH ARE PERFECT ONE SET IS NEW! THE UNIT HAS BEEN TESTED AND IS WORKING FINE! THIS UNIT CAN THREAD UP TO 6" WITH THE RIDGID 161 ATTACHMENT (not included, but we have one listed on Ebay if you need it!).
THIS UNIT NEW IS OVER $10,018.00 AT GRAINGER... THAT'S WITH ONLY TWO DIE HEADS AND NO ROLLING STAND! ADD ON ANOTHER $873.50 FOR THE STAND... THEN THE EXTRA DIES $150.00+, FOR A GRAND TOTAL BEFORE SALES TAX AND SHIPPING OF $11,041.50! THEN ADD ON ANOTHER $683.00 FOR THE 3RD DIE HEAD.
STILL WONDERING IF IT'S WORTH THE MONEY??? HERE IS AN OLDER USED UNIT CLAIMED TO BE USED ONCE FOR 2 HOURS, CURRENTLY LISTED ON EBAY FOR $14,000.00. IT IS A NICE LOOKING UNIT AND IT HAS 3 DIE HEADS AND A FEW OTHER EXTRAS, BUT THERE IS NO MENTION OF, FREE CRATING, FREE SHIPPING, OR A MANUAL! TO SEE THAT UNIT...
HERE IS ANOTHER USED UNIT CURRENTLY LISTED ON EBAY FOR $7400.00. IT IS A NICE LOOKING REFURBISHED UNIT AND IT HAS 2 DIE HEADS, BUT THERE IS NO MENTION OF, FREE CRATING, FREE SHIPPING, OR A MANUAL! TO SEE THAT UNIT
BUT YOU CAN BUY THIS UNIT FOR A CHEAP "BUY-IT-NOW" PRICE OF ONLY $6,475.00!.... THIS PRICE INCLUDES SHIPPING AND CRATING (and a 3rd die head)! DON'T LET THIS DEAL GET AWAY!
NEED FINANCING?... TRY
THIS UNIT IS IN "VERY GOOD TO EXCELLANT CONDITION!" IT HAS BEEN DETAILED AND TOUCHED UP WHERE NEEDED! WHAT YOU SEE IN THE PIC'S IS WHAT YOU GET AND MAY VARY SLIGHTLY FROM THE FOLLOWING MANUFACTURER'S DESCRIPTION ........
1224 Threading Machine
Model 1224 Threading Machine
Threads 1/4"-2" pipe at 36 RPM and 2-1/2"-4" at 12 RPM
The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
An induction motor helps insure sounds levels well within the limits set by the regulating authorities
A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced
1/4"-2" Universal Die Head; 2-1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads
Constant and proper lubrication of dies and workpiece with through-head oiling
Approved to UL Standards (NRTLC)
Pipe Capacity: 1/4" - 4" (6 mm - 100 mm), 4" - 6" (100 mm - 150 mm) with 161 Geared Threader
Bolt Capacity: 1/4" - 2" (6 mm - 50 mm)
Motor: 1-1/2 HP, single-phase, 60 Hz or 50 Hz, induction type
Motor Control: Reverse/off/forward, heavy-duty rotary-type and integral foot switch
Spindle Speed: 36/12 RPM
Gear Box: Two-speed gear box 3:1 ratio
Chuck: Hammer-type with replaceable rocker-action jaw inserts
Rear Centering Device: Cam-action
Cutter: Model 764 full-floating, self-centering 1/4 "- 4" with F-229 cutter wheel