YEAR 2009 LATEST VERSION
-Train 2 dogs in
Simultaneously and Independently
100 Levels of Static
Stimulation & 100 Levels of Vibration
LCD Monitor Display &
Belt-Clip Designed Remote
(This package had
included 2 Receivers)
It is an effective training system
specially designed for the trainers who wish to train up 2 dogs simultaneously
Just need simple mapping the collars, up
to 2 dogs are under control by 1 remote.
This latest multi dog training system provides a convenience and simple-to-use
(can be used for a single dog also) but economical solution to all dog owner!
Consistent and correct use of this remote dog trainer allows you to reinforce
commands and correct your dog’s misbehavior up to
- Brand New
- LCD Monitor
Display & Belt-clip designed remote
100 levels of vibration
100 levels of static shock
- With no jumps
from 0 to 100 levels
300 meters remote controlling range
- Rheostat dial
allows for gradual adjustment in stimulation intensity
- Four modes:
static shock, vibration, beep and light
screen displaying level of stimulation collar
different identity codes to prevent conflicts with other e-collars
The levels can
be altered by use of up and down button.
A tone button
activates a tone on the receiver.
The system can
be used for 1 or 2 receivers.
(This package had
included 2 recievers)
will TURN OFF if it is unused for 4 minutes.
will activate the receiver into STANDBY MODE.
transmitter will go into STANDBY MODE if there is no operation after 20
seconds and turn off after 2 minutes
- To install
the batteries, open the battery cover.
battery cover is at the back of the transmitter.
- Open by
sliding the over down.
- Install 2
x 4LR4/6V batteries (Included) -
ensure the the polarity is correct.
transmitter will be TURN ON automatically.
- Press the
buttons one by one: the LCD images will be changed.
- Press the
up and down buttons on right hand side to set level
channel 1 or 2 for 1 or 2 receivers
- The LED
light can be used for giving training signals.
transmitter will go into STANDBY MODE if not operated for 20 seconds and
will TURN OFF if not operated for 2 minutes.
- In STANDBY
MODE, press any button (except LED light button) to wake it up.
- To TURN ON
the transmitter, hold mode button at least 5 seconds
About Receiver and
Matching with the Transmitter
- Remove the
- Insert 2 x
AAA/1.5V batteries (Not Included)
ensure the polarity is correct.
receiver will beep.
- Go to the
transmitter and choose Channel 1 or 2 to encode by pressing the channel
button 1/2 in the transmitter.
- Press the
LAUNCH button on transmitter immediately.
receiver will beep, by now, it has been encoded to the transmitter.
cover and tighten metal probes.
How to Check the
Static is Working
- Use the
test light LED - provided. Attach the light to the metal probes - select
Static Mode - you can see static symbol on the screen - press the LAUNCH
button - the LED will flash on.
low number on the LCD display - put your fingers on the metal probes and
press the launch button.
2 x Belt
1 x Testing
- 2 x 4LR44 6V
- 1 x User
Important Notes :
This device should be serve as an education assistant only
but for punishment. Trainer suggest to read all operations instructions
carefully before use it! For correct use this training kit , Trainer should
have a training lesson to your dog which let him know the relation between
the collar signal and your command.
The lifetime of the batteries vary according
as how often you use the product. Therefore you should often check the
batteries by watching the indicator light in the receiver and the indicator
sign on the LCD screen of the transmitter.
The valid distance of remote controlling means the
straight-line distance between the transmitter and the receiver without
obstacles in between. If there are interference signals or signal screening
around, the actual remote control distance may vary.
This product is for pet training. Only by training,
the pet can understand the intention of its owner. Good effect can only be
achieved after a period of training.
Training sessions should be kept positive and short,
about 10-15 minutes long each time.
Presently, this product is the most effective
and safest tool for training pet. Following the correct operational
instructions, you can effectively train the pet and bring it no harm.