Item Description
Hedman
Headers

All Bidders Please Read Entire Listing

 

All Items are new in the manufacturer packaging unless otherwise stated in description.

 

Finish: Black painted

Includes: Collectors, Gaskets, Hardware

Listing is for a Pair of Headers

 

1975-91 Ford Class C Motorhome/Vans 302/351W V8

Tube Diameter: 1 5/8" Collector Diameter: 3"

Headers subject to Hedman footnote #'s 1, 4, 6, 45, 225 Emissions Notes: K

(Match up these numbers to the Hedman Footnotes & Emissions Notes listed at bottom)

Fit Transmissions: Auto Column: Y, Auto Floor: Y, Manual Column: Y, Manual Floor: Y, P/S: Y, A/C: Y

 


Y = YES It does fit / N= NO it does not fit
 

Hedman Street Hedders are one of the best buys in bolt-on performance.
For the price, no other part can give you the horsepower and fuel-economy improvements of Hedman headers. They make their Hedman Street Hedders so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street Hedders are available in black painted or ceramic coated finishes, and, as an added bonus, they also come with all necessary gaskets and mounting hardware.



 

Warranty:

Hedman Hedders warrants their Street Headers against defects in materials and workmanship for the lifetime of the product. This includes tube cracks, bad welds, warped flanges, etc. In addition, the HTC ceramic coating utilized on Hedman's ceramic-coated headers is warranted for 5 years from the date of purchase against chipping, peeling, fading, discoloring, and rusting. Headers subjected to improper installation, off-road use, road hazards, and the use of Thermal Wrap are void of any warranty whatsoever. The ceramic-coated headers' finish warranty is void if the headers are used on engines equipped with superchargers, turbochargers, or nitrous systems.

 

PICTURE MAY NOT REPRESENT ACTUAL PART

(picture is manufactured by the same manufacturer as item listed, for quality assesment purposes only, The item you are bidding on is for the item stated in title and description)

Questions????

Contact us by emial. We will get back to you as soon as possible, We are closed on all weekends and holidays.

Important terms:

We do our best to keep items in stock but due to sales to local customers, Online customers outside of ebay, as well as in house customer jobs we cannot guarantee the item to be in stock, therfore All items in our ebay store are considered special order items unless stated otherwise above the description. All special order items may take an additional 6 weeks before shipment. (some rare applications have taken as much as 8 weeks(NOT including the shipping time) Most items however are shipped within 5 business days. Special order items are odered direct from the manufacturer on a per order basis. If this is a problem please do not bid. If you need the item sooner please check with us to determine if the item is currently in stock, or to determine the estimated shipping date.

_________________________________________________________________

Availability:

Availability does not imply that an item is in stock ready for shipment. Manufacturers do get behind in their orders.

We do our best to keep items in stock but due to sales to local customers, Online customers outside of ebay, as well as in house customer jobs we cannot guarantee the item to be in stock, therfore All items in our ebay store are considered special order items unless stated otherwise above the description. All special order items may take an additional 6 weeks before shipment. (some rare applications have taken as much as 8 weeks(NOT including the shipping time) Most items however are shipped within 5 business days. Special order items are odered direct from the manufacturer on a per order basis. If this is a problem please do not bid. If you need the item sooner please check with us to determine if the item is currently in stock, or to determine the estimated shipping date.

_____________________________________________________________________________________________

Shipping Terms and Conditions:

We Will combine shipping on multiple items. Please wait for us to send an invoice reflecting the combined shipping price. If checkout is performed before we have sent the revised invoice reflecting combined shipping we cannot change the total.

We ship via USPS, UPS and FedEX ground for all domestic shipments (within the 48 states) Hawaii, Alaska, and all international shipments are shipped via USPS. Bidders from Hawaii, Alaska and Internationl bidders please contact us for a shipping quote. Shipping is non refundable. Shipping times quoted are taken directly from the shipping company, we are not responsible for any delays one the item leaves our facility, These delays are the sole responsibility of the shipping company. For International Buyers Priority shipping is quoted at 8-12 days. Domestic shipping USPS priority is 2-4 days, UPS & FedEX ground is 2-6 days. Payment is due within 15 days or negative feedback will be left and non-paying bidder will be filed with ebay. We reserve the right to drop ship items direct from the manaufacturer. We reserve the right to refuse service to anyone.

Important terms:

We do our best to keep items in stock but due to sales to local customers, Online customers outside of ebay, as well as in house customer jobs we cannot guarantee the item to be in stock, therfore All items in our ebay store are considered special order items unless stated otherwise above the description. All special order items may take an additional 6 weeks before shipment. (some rare applications have taken as much as 8 weeks(NOT including the shipping time) Most items however are shipped within 5 business days. Special order items are odered direct from the manufacturer on a per order basis. If this is a problem please do not bid. If you need the item sooner please check with us to determine if the item is currently in stock, or to determine the estimated shipping date.

____________________________________________________________________________________

Return Policy:

All returns subject to a 20% restocking fee. Shipping charges are non-refundable. All returned items must be returned in the original manufacturers packging, in new,unused condition. All Manufacturers warranty issues should be taken up with the manufacturer directly. All Item smust be returned to FCRC Machine directly, If the item was drop shipped and returned to the manufacturer or supplier we cannot guarantee refund in aa timely manner.

 

 

Hedman Footnotes:

APPLICATION FOOTNOTES
* Not applicable or intended for street or highway use. Legal only for racing vehicles which may never be used upon a highway.
0
T.E.M.S.TM Tubular Exhaust Manifold System.
1
Without smog injection or injection heads.
2 Three tube design.
3 Front motor mounts only.
4 Includes parts necessary to retain emission devices. (50 State)
5 With A.I.R. system.
6 Modification to stock exhaust required to retain catalytic converter.
7 Will not fit 67-69 Camaro with A/C.
8 Spark Plug clearance limited.
9 Factory side exhaust cut and welding is required.
10 Except round ports.
11 GTO 1964-73.
12 For EGR models only.
13 A-type engine only. (Will fit with in-line port pattern only)
15 Shortie style hedder. Maximum ground clearance.
16 Check regular section of catalog for specific listings. Look for same part number replacing last digit 4 with a 0. Pay special attention to emission footnotes.
18 Will not fit 400 Cleveland (400M).
19 Will not fit 71-73 with manual transmission.
20 Not recommended for use with aluminum heads.
21 Fits Cobra Jet heads only.
22 Fit standard 429-460 heads only.
23 Some heads require drilling and tapping of end holes.
25 Engine swap, all parts must be factory stock.
26 A/C equipped vehicles require bracket #20110 (Large piston type compressor).
27 Power steering bracket #20120 required.
28 With 4-2-1 collector.
30 Dog leg port only.
32 Designed for stock mounts in stock location and stock width oil pan.
33 Due to engine location, will not fit 1970-72 Cutlass Supreme, Hurst, SX or Convertibles.
34 For manual transmission use clutch cable bracket #20130.
35 One tube around frame each side.
36 14 gauge tubing.
38 16 gauge tubing.
39 Will fit Brodix high port or stock heads, but not with deck block.
41 Fender well exit.
42 Square port hedder.
44 Will not fit Dana 60 front differential.
45 Not legal for sale or use in California on pollution controlled motor vehicles.
46 Will not fit factory V-8 installation.
47 Some vehicles may encounter clutch shaft interference when cross shaft location is located under or behind the driver's side rear exhaust port. Use #69092 without A.I.R. Use #69093 with A.I.R. Order Elite #69892.
48 Will not fit torsion bar suspension.
49 Will not fit (Saginaw) close ratio P/S with 825 power steering box, 1967-69.
50 Iron Duke Pontiac 2.5 liter.
51 Under chassis exit.
52 All Tubes fenderwell exit.
53 One pipe each side over frame.
54 One pipe one side over frame.
56 Column shift must be modified on some models or converted to floor shift.
58 World Products Windsor Jr. flanges.
59 Must use 60º oil filter - must purchase from Mopar Dealer.
64 Battery must be moved to trunk.
65 Must use remote oil filter.
66 Race Car Hedder - Flat Style Collector.
67 Race Car Hedder - not adjustable.
68 Race Car Hedder- Slip-on Collector, for adjustable see accessory listing.
69 Flange may need to be cut between ports to install. Do not cut between twin ports.
71 Hedder will fit Pro-Stock with engine dropped 1" for clearance and stock location.
72 Designed without use of 60º oil filter adapter. Filter must screw directly to engine block.
73 It will be necessary on most models to use a Trans-Dapt Performance remote oil filter.
74 Clutch linkage on some models must be modified.
75 4 barrel heads only.
76 Hedders come with street hook-ups.1
77 Hedders come with street hook-ups with oxygen sensors.
79 Stock Chevy Bowtie.
80 Headers come with sub-flange.
90 Comes with Standard/Wide sub-flanges (4-3/4" center bolt spacing). Special order if Econo/Narrow (4" center bolt spacing) are needed.
  91 Collector type Hedder.
  92   Zoomie type Hedder.
96 Hedder only - must use motor mount plate #56066.
97 Must use Trans-Dapt #9906 conversion motor mounts with 2.8L frame mounts.
100 Will not fit steering damper inside front crossmember.
102 Possible tire interference, especially on one ton crew cab.
103 Will fit with angle plug heads (Chevy aluminum only).
104 On some models it may be necessary to remove Z bars. (SS Series)
105 Fits new angle plug heads, w/ raised exhaust ports.
106 Will not fit power brakes.
107 Will fit 2V heads only.
108 With automatic transmission, C-4 only.
109 Dual exhaust only, limited ground clearance.
110 Will not fit E.F.I.
111 Will not fit with late model hi-torque starter.1
112 Must use factory big block chevy hardware & mounts.
113 Must notch crossmember on driver's side.
114 Hedder comes with weld-on collectors.
121 Must modify rotary A/C bracket.
124 Will fit F.I. with E.G.R.
126 Must use Trans-Dapt Performance swap mount kit #9736.
127 Late model chassis. Engine offset to passenger side of vehicle.
128 Fits factory stock transmission 64-67 only.
129 Modification to shift linkage may be required.
130 Must use Trans-Dapt Performance mount #4686.
131 Chevy engine.
132 Hydraulic clutch only.
134 Dual outlet.
135 Transmission size limited to 700R4 and 350 Turbo.
136 Must use 1975 and later model clutch linkage located at rear of engine.
138 Will not fit Camper Special or vehicles equipped with front sway bar.
139 Must use 1975 and later model clutch linkage located at rear of engine.
140 Replacement Y-Pipe available. See gasket section.
141 Will not fit models with starter solenoid located on top of starter.
142 Will not fit 440-3 or industrial engines.
144 Complete with Y-Pipe to single catalytic converter.
145 Complete with dual Y-Pipe to dual catalytic convereters.
146 Will not fit F series super duty chassis cabs, utility, stake bed, etc.
147 Must use Trans-Dapt Performance motor mount kit #9906.
148 Must use Trans-Dapt Performance motor mount kit #4689 & Turbo 350 trans. with 168 tooth flywheel.
150 Competition hedder - Allow for extended delivery time.
151 Must use mini starter.
151A Use T.C.I. starter #351106. Tilton type must use 153 tooth flywheel.
152 Made in and shipped from California.
153 Must use Classic Chevrolet steering box.
155 Must use small, 153 tooth flywheel.
156 Will not fit with 11", 143 tooth flywheel.
157 When equipped with manual transmission, will not fit with Ford top loader trans.
160 Early chassis only.
162 Firewall must be modified.
163 Stepped Hedder with PowerPlus Reversion Chambers & Equalizer Y-pipe.
163A Center bellhousing stubframe must be removed/maximum ground clearance.
165 See additional information on pages 16-17.
166 Will not multi-shock absorber factory or aftermarket installations.
167 Must use #21107 oxygen sensor reducers, not supplied with hedder.
200 For those vehicles intended for highway use change the last digit part # 1. (Example: Change part #98310 to 98311. These hedders are C.A.R.B. approved.)
201 Must use Powermaster #9506 mini starter.
203 Non-E.G.R. equipped
204 With E.G.R.
205 With precatalytic converters.
206 Will not fit engines with precats.
207 All "C" Body.
208 Due to clyinder heads (aluminum) generation 6 engines, 502 BB Chevy will have clearance problems on some applications. Bottom of hedder flanges may hit head bolts. Notching may be necessary.
209 Must use Trans-Dapt kit #4100.
210 Must use Trans-Dapt kit #4696.
211 Will not fit 75-79 Monza w/factory SB Chevy.
212 Elite replacement gasket #27520.
213 Elite replacement gasket #27550.
214 Elite replacement gasket # 27340.
215 K5 Blazer up to 91.
216 Crew cab chassis only.
217 2WD 68-69 only.
218 Universal oval port design.
219 Will fit 605 steering box.
220 Not Turbo.
221 Engine must be centered between frame rails, per instructions.
222 Modification to clutch linkage may be needed.
223 Right & Left flat 3-bolt flange connector to stock Y-pipe.
225 Designed for use with a Trans-Dapt throttle body spacer, see www.tdperformance.com for more information.
232 No drop spindles.
233 Modify passenger side shock tower on 351 applications.

Emissions Notes:

EMISSIONS FOOTNOTES
(*) Not applicable or intended for street or highway use. Legal only for racing vehicles which may never be used upon a highway.
(A) This hedder has been submitted to the California Air Resources Board for criteria and exemption approval. Pending approval, the E.O. # should be available soon.
(B) Not applicable or intended for street or highway use. Legal only for racing vehicles which may never be used upon a highway, check footnotes also.
(C) For vehicles 1964 through 1974 without A.I.R. systems, considered as O.E.M. replacement parts when existing emission controls are not removed from vehicle.
(D) Not legal for sale or use in California.
(F) For vehicles 1964 through 1974 with A.I.R. system, considered as O.E.M. replacement parts, and do not require an E.O. #, when existing emission controls are not removed from vehicle.
(G) 1975-1976 only, 50 state legal for these years only.
(H) 1975-1977 only, 50 state legal for these years only.
(I) 1975-1979 only, 50 state legal for these years only.
(J) 1975 through 1979 including vehicles with production date to 12-31-79, registered as 1980, non-feedback systems only are 50 state legal.
(K) 1975-1980 only, 50 state legal for these years.
(L) 1977-1979 only, 50 state legal for these years.
(M) 1978-1980 only, 50 state legal for these years.
(N) 1975-1981 only, 50 state legal for these years.
(O) 1975-1982 only, 50 state legal for these years.
(P) 1975-1986 only, 50 state legal for these years.
(Q) 1980 only, 50 state legal for this year.
(R) 1980-1981 only, 50 state legal for these years.
(S) 1975-1991 only, 50 state legal for these years.
(T) 1982 only, 50 state legal for this year.
(U) 1982-1986 only, 50 state legal for these years.
(V) 1975-1985 only, 50 state legal for these years.
(X) T.E.M.S. (Tubular Exhaust Manifold Systems) are 50 state legal for years listed in catalog only.

Powered by
The free listing tool. List your items fast and easy and manage your active items.