Decal size : 33" L X 11 1/2" H
Can be applied on any smooth flat surface like glass, or any painted surface.
Easy to remove with no sticky things behind,no harm to your paint, car wash safe professional grade vinyl..
Design is cut-out, it is not a solid big piece, The backround color would be the color of your wall or whatever you put it on.
"GOT AN IDEA FOR A DECAL FOR YOUR VEHICLE OR A WALL ? I CAN MAKE ANY DECAL ANY SIZE"
If you want different color , size , reflected image
make sure leave a note when check-out with paypal.
otherwise the default color and size stated
$2.00 S&H. USA
"BUY AS MANY ITEMS AS YOU WANT IN MY STORE AND PAY THE LOWEST SHIPPING PRICE OF 1 ITEM"
EXTRA SHIPPING FEES WILL BE REFUNDED THROUGH PAYPAL
1. Apply to the outside of a window or smooth painted surface. It's very important
(also see pictures and step by step illustration below)
1. It's very important to clean window or surface with rubbing alcohol and apply in the shade. DO NOT apply in the sun or to hot glass. Do not apply if the tempurature outside is below 50 degrees. Also, trying the sample decal first will help if your unsure.
3. You will be applying half of the decal at a time. One the side you didn't tape peel back
Pictures for the Exact Positioning Method....It's Easy!
|1. Gather simple supplies. For this method you'll need tape, rubbing alcohol, scizzors, napkins, and a squeeqee or credit card. Clean the surface well with rubbing alcohol.||2. Tape Decal to surface as shown using three pieces of tape as shown. Masking tape works well. Make sure you tape it excactly where you want it because that's where it will end up.|
|3. Peel back side without tape and cut wax paper underneath. You might want a friend to help hold the stick part so it don't fall back on the glass.||4. With the wax paper cut off on one side, get ready to apply half of the decal. Preferably using a squeegee or credit card applying from the center outwards to reduce air bubbles.|
|5. Apply the one side from center outwards.||6. Remove the three pieces of tape now. Lift the other side.|
|7. Peel off wax paper backing from where you cut with the scizzors and hold the rest of the decal up and get ready to apply like you did the other side.||8. Squeegee the other side on as you did the first side. From the center out to reduce air bubbles.|
|9. Once the whole decal is applied, very slowly remove the top layer of application tape at a sharp angle from the sticker.||
10 . Awesome job!
Note: Some of the logos included on this site are the trademarks or registered trademarks of their respective companies, and are provided as a convenience only for their lawful use. It is the expressed intent of vinyl-4ever that any unauthorized use of these items by the purchaser shall be the sole responsibility of the purchaser. The purchase of any item from vinyl-4ever is not authorization for the use of any specific logo or trademark. By purchasing said logos, you are indicating that you have authority to use the artwork.
The free listing tool. List your items fast and easy and manage your active items.