On Feb-05-11 at 16:09:38 PST, seller added the following information:
- 2 Decals Size is 11.5 inches tall 15.5" wide.
When making your color choice please be aware that our decals do not have a background or background color at all. These are decals not stickers. Our decals are die cut from vinyl. When applied all you will see is the outline as shown in the images. If the decal will be going on glass you will want to use a bright color like white, yellow or pink. Black and other dark colors will not show up well on glass.
? Our decals can be
applied to any smooth flat surface including car, truck, van and
? Our decals can also be used on the body or hoods of automobiles like sports cars, race cars and trucks.
You can even use our decals on your motor home or camper.
? Our decals can also be used for wall art. You can apply any of our decals to the walls in your home, office or garage to add whimsical art.
? You can also use our decals to personalize your laptop or books. Our decals make great laptop skins.
? Other places you could use our decals include - horse trailers, kayaks, boats, vans, motorcycles, ATVs, snowboards, snowmobiles, surfboards, RV's, helmets, glass doors, gun cabinets, mirrors, walls, mailboxes, picture frames, tool boxes, painted wood, aluminum, plastics, fiberglass etc...
Personalized Car Window Decal Stickers
Our custom decals make the perfect accessory for your car, truck, boat, motorcycle, ATV, snowmobile, surfboard, horse trailers, car windows, truck windows, walls, mirrors, glass doors, glass tables, gun cabinets, picture frames, mailbox or just about anywhere. Vinyl decal stickers are durable and designed to withstand the weather. Please send your special request to , and I will list it on Ebay.
Our decals are very easy to apply.
To apply one of our decals to any smooth flat surface:
? For larger decals it is much easier to apply them with the help of a friend.
? Clean the surface very well. If it is being applied to glass clean it with rubbing alcohol. If it will be going on a painted surface or wall clean the surface with a mild soap and water mixture.
? Hold the decal up to where you want to apply it. Go through the motion just as if you were installing the decal. This will aid in lining up the decal when applying it.
? Remove the clear tape from the backing. The decal will adhere to the clear tape as the tape pulls away from the backing. Be very careful not to let the tape or decal stick to itself while removing.
? Hold the decal just above where you would like it applied. Gently allow the middle to touch the surface. Then let the edges down gently.
? Use a license, credit card, or other flat smooth object to scrape across the tape. Do this to remove any air bubbles and activate the glue. The decals are pressure sensitive so the more pressure you apply the better it will stick.
? Gently start at one corner and pull the tape back at a very sharp angle. The tape should pull free of the decal leaving just the decal on the surface.
That's it... you now have installed your new decal.
Please note that it is much easier to apply the decals if the temperature is above 45 degrees Fahrenheit.
About our Decals
Our decals are die cut from solid 2.8mil vinyl. The vinyl is rated at 5+yrs outdoors. Our decals can withstand cold, hot and wet weather with no problem. If you are using the decal inside they will pretty much last as long as you want them. The decals can be removed from any surface but cannot be reused once removed.
Pick Your Color
Black, Blue, Yellow, Burgundy, White, Red
Also available in my store for instant purchase .
FREE SHIPPING USA
On Feb-05-11 at 16:09:26 PST, seller added the following information:
The free listing tool. List your items fast and easy and manage your active items.
On Apr-06-11 at 05:57:52 PDT, seller added the following information:
How should I prepare the surface for the decal? Should I use a dry method? Should I use the wet method? How should I care for my decal? How do I remove my decal? I have another question, how can I contact you? How should I prepare the surface for the decal? Please read these instructions all the way through before starting your application. The surface must be clean, and free of all oils, waxes and dirt. If decal is to be applied to GLASS, use Windex or a comparable cleaner to clean the glass. If you use RainX, try Formula 409 to remove it. On painted surfaces wipe with a wax remover or alcohol if applying on freshly waxed paint. These Decals come to you in three layers. The top layer is called the Transfer Tape. It looks somewhat like regular masking tape. The middle layer is the actual Decal. The bottom layer is a Backing Paper treated with a release agent. Should I use a dry method? You will need a needle, a laminated drivers license or a similar type squeegee. Apply Decal at room temperature ( 55 to 75 degrees) or above. The warmer it is, the better it works, but, try to avoid direct sunlight. Take the drivers license or squeegee and flatten the Decal on both sides by rubbing over it. If your Decal was shipped rolled, lay it out flat and let it relax for an hour or so. The Decal will be easier to handle if flat. Next, try to make sure the air bubbles are removed as much as possible. There should be only a few bubbles at this point. Double check to make sure that your Decal(s) were meant for inside or outside application. 99% of the time they will be for the outside. Turn the Decal upside down on the transfer tape and pull backing off SLOWLY. The backing is the heavier gauge paper. Using a needle or similar pointed object, hold edges of letters and all small areas while pulling away the backing. If a letter moves, just position it back into place by pushing backing down and move letter back to original position. You are now ready to apply the Decal. Hold the Decal over your desired location and slowly apply the Decal to the surface. Try to touch the surface first at the center of the Decal and then flatten out to the sides. Next, use your drivers license or squeegee again to flatten as much of the Decal as possible. The transfer tape will allow you to rub the decal without damaging it. . Peel back an edge of transfer tape SLOWLY. Watch the small letters and corners, making sure they are sticking to surface, and not to the transfer tape. Remember, PATIENCE IS THE KEY. DO NOT RUSH. Once the transfer tape is removed, take your fingers and rub gently over the corners and points of your decal to make sure they are adhered firmly to the surface. If by chance you have an air bubble(s), use your needle and give the air bubble(s) a small poke, this will create a small hole for the air to escape. Press around the air bubble, working the air to the small hole. The bubbles may disappear after a day or two. REMEMBER Once the Decal touches the glass or paint, it cannot be moved again. PATIENCE IS THE KEY. Should I use the wet method? (This method should be used only on windshield applications, unless you have installed decals professionally.) Mix a gallon or so of water with a few drops of dishwashing liquid. Use a spray bottle and wet the area where the decal is to be applied. Trim away the transfer tape so that the tape is about (within 1/2") border, of your Decal. Remove the backing paper the same as the Dry Method instructions and place the Decal, still attached to the transfer tape, to the thoroughly wetted surface. The decal can then be gently moved and repositioned correctly. Your Decal will slide on the thin film of solution trapped between the vinyl decal and the surface. If you are doing a windshield decal and need to curve the letters, cut the transfer tape with a pair of scissors between the letters about 3/4 of the way from the top of the Decal and position the letters where needed. DO NOT cut all the way through as this will mess up your spacing between the letters. When the decal is in the final location, use a small squeegee or drivers license to squeeze the water and detergent solution out from under the decal. The transfer tape will protect the decal during this process. CAUTION Be sure to squeegee as much solution as possible from under the decal. Take your time, because if not enough solution is removed from under the decal, the Decal will not adhere to the surface enough to allow the easy removal of the transfer tape. Although a squeegee is the recommended tool, the water can also be removed by using your fingers, or a soft cloth. When through with the squeegee, the transfer tape can be carefully removed. Work the decal with your fingers, and a soft, absorbent cloth around the edges and corners to remove any remaining solution. Warm weather is best for this application. If there are bubbles present under the decal that cannot be removed by working them to the edge of the decal with your fingers, then a small pin or needle can be used to puncture the decal at the bubble, to remove the air. A small pin hole will not be seen after the air bubble has been worked out with the fingers. How should I care for my decal? In colder climates, decals on windows of vehicles can be damaged by the scraping of frost or ice from the windows. Mild window cleaner may be used to clean the windows without damage to the decal. On painted surfaces of vehicles, care must be taken when waxing. Wax will build up around the edges of the decal, and will need to be removed. Use a soft cloth, and take your time, and be gentle. DON'T DO. A brush, for example will force the wax underneath the edge of the decal, and the decal will begin to peel. Your Decal will not be damaged by normal use of car wash products, or water. Although the decals will withstand pressure washers and car washes, these will reduce the life and appearance of your Decal. The decals will not last forever, but will give you many years of enjoyment if taken care of properly. How do I remove my decal? On glass surfaces, with temperatures between 70 and 80 degrees, a razor blade scraper can be used. Decals can be removed from painted surfaces by using a heat gun or hair dryer to warm the decal to the point to where it peels off easily. THE APPLICATION OF VINYL DECALS REQUIRES A DEGREE OF DEXTERITY AND CONCENTRATION. IF YOU FEEL THAT YOU CANNOT APPLY THE DECAL YOURSELF, ANY AUTO DETAILER, OR BODY SHOP CAN APPLY IT FOR YOU. WE CANNOT BE RESPONSIBLE FOR REPLACING DECALS THAT HAVE BEEN DAMAGED DURING APPLICATION.
Note: Some of the logos included on this site are the trademarks or registered trademarks of their respective companies, and are provided as a convenience only for their lawful use. It is the expressed intent of vinyl-4ever that any unauthorized use of these items by the purchaser shall be the sole responsibility of the purchaser. The purchase of any item from vinyl-4ever is not authorization for the use of any specific logo or trademark. By purchasing said logos, you are indicating that you have authority to use the artwork.
- new h4 3.5w 68-smd led 6500k 310-lumen white fog lights $10.25 Free Shipping
- 2x 14 smd led arrow panel for car rear mirror 022698 $4.99 Free Shipping
- 2 x cree led car door laser welcome lights for $27.04 Free Shipping
- 2x car front light headlight h7 ultra white xenon bulbs $13.24 Free Shipping
- disney mickey mouse car air freshener perfume air 10212 $4.59 Free Shipping
- new h7 5w 102-smd led 6500k 460-lumen white fog lights $15.53 Free Shipping