NOTE: THIS IS NOT A KIT ONLY INFORMATION!
COMPLETE STEP-BY-STEP INSTURCTION ON HOW TO REVIVE ANY LIFE-LESS " LEAD ACID" BATTERY.
BATTERY FAILS TO TAKE A CHARGE
BATTERY IS WEAK EVEN AFTER CHARGING OVERNIGHT
BATTERY HAS BEEN STORED FOR MONTHS OR YEARS OF NO USE
BATTERY REGISTERS ATLEAST 12 VOLTS BUT DOES NOT HAVE MUCH CRANKING POWER
THIS WILL ONLY WORK ON "LEAD ACID" BATTERY TYPES!
WHAT YOU SHOULD EXPECT:
95% SUCCESS RATE
INGRIDIENTS TO COST YOU JUST A FEW BUCKS
RESTORE YOUR BATTERY CLOSE TO NEW CONDITION
MOST COMPLETE THE PROCEDURE IN AS LITTLE AS 10 MINUTES
SIMPLE & SAFE HOUSEHOLD INGREDIENTS TO DO THIS PROCEDURE
YOU WILL BE ABLE TO RENEW AS MANY BATTERIES AS YOU WISH, YOU ONLY NEED ONE
PROCEDURE TO WORK ON ANY "LEAD ACID" BATTERY PACK REGARDLESS OF ITS VOLTAGE
TREATMENT CONTINUES TO WORK EVEN WEEKS AFTER APPLYING THE PROCEDURE, EXTENDING THE LIFE OF THE BATTERY.
I am an ASE Certified Mechanic and I'm only here to help others restore those old batteries just sitting around collecting dust in their garages, awaiting their eventual demise. In the meantime, I'm helping the environment. This is a secret that we in the automotive repair field have been using for years on our own batteries. The battery manufacturers and automotive repair industry have done their best to keep this secret from reaching the consumer, and they would like it to stay that way!
If you have ever left a vehicle sitting for any long period of time and attempt to start it, you quickly find that Lead Acid Batteries simply do not maintain a charge for very long. You will also find that even after charging, the battery just doesn?t perform as well as before you stored it, if it will hold a charge at all. The reason for this is because the electrodes (lead plates) have experienced sulfation. Sulfation refers to the process whereby a lead-acid battery loses its ability to hold a charge after it is kept in a discharged state too long due to the crystallization of lead sulfate. In the discharged state, the electrodes turn into lead sulfate and the electrolyte (sulfuric acid solution) loses its dissolved sulfuric acid and becomes primarily water. This chemical reaction has basically turned your Lead Acid Battery into a doorstop.
Now let's be realistic, there are some batteries that just cannot be restored. Such batteries include those that have corroded internally, been frozen, or the electrodes have shifted to where they are touching each other causing an internal short. This is most commonly caused by leaving the batteries on a charger for an extended period of time, or by leaving them on a solar charger. A common misconception is that starting batteries should always be kept on a constant float charge such as using a solar charger. In reality, this practice will actually encourage corrosion in the electrodes and result in premature failure. Starting batteries should always be stored open-circuit (disconnected from everything) but charged regularly (at least once every two weeks) to prevent sulfation. If your battery does not register atleast 12v if it is a 12v battery then this procedure probably will not work for you.
Please be aware, this is not a "Miracle Kit." I am only giving you the "instructions" needed to buy the products & how to perform this easy procedure on your own.
If you want to save your money right now by restoring that old battery, simply click the " Buy Now" button and you will receive your instructions via First Class Mail-e, often in less than 1 Day depending on time of day purchased.
Your Satisfaction is Guaranteed!
If, for any reason, you are not satisfied with the results of this simple and inexpensive method of restoring your battery & are considering leaving a neutral or even worse a Negative feedback, I will gladly give you a full refund.
Please purchase with confidence.
I have close to 100% positive feedback, and I plan to keep it that way!