Item Description
[[Title]]
 
Hidden Amplified AM/FM Antenna
Kit
 
Remove that ugly antenna and
install this cool hidden powered antenna with amplifier.
Designed for optimum AM/FM
reception covering all broadcast radio.
 
BRAND NEW in package from
KAPSCO INC.
102 Inch cable length for easy
installation
 
VELCRO
MOUNTING - did you mount the antenna and decide it was not the best
spot for reception?
NO
PROBLEM! With the Velcro mounting you can adjust the location
of the antenna anytime.
No other
hidden antenna offers this feature!
 
Specifications
Here's a hidden internal antenna that really
works! It simply mounts to the inside of any fiberglass or plastic
fairing and plugs into any standard AM/FM antenna jack. Requires a
switched 12-volt power source.
This amplified antenna works well for radio
installations where a conventional antenna is a challenge to mount
or you don't want to drill a hole. Great for hidden stereo installs
and clean antenna-less fenders.Used on: Hot Rods, Customs,
Motorcycles, double duty race cars, Boats, etc. Can also be used
for replacing a damaged factory windshield antenna.
 
Installation
First, pick the spot where you want to install
the hidden antenna. The best place is along the top of the
windshield or behind the rear view mirror. It does not matter if
the antenna is horizontal or vertical. The antenna includes Velcro
for mounting, so if you decide to change the location of the
antenna you can do so easily. Exclusive feature! Do not place the
antenna where it will affect your forward visibility. Metal will
not allow reception, avoid surrounding the antenna with metal and
keep the antenna at the highest point possible. Glass, plastic and
fiberglass do not affect reception.
Before sticking the antenna to the glass, make
sure you have figured out how you are going to run the cable and
power back to the radio. You should not pinch the wires in any way.
Clean the surface where you are planning on attaching the antenna
with an alcohol prep pad or else the antenna will not stick.
The Motorola plug will fit most radios. It
simply plugs into the back of the radio. Some cars/bikes may
require an adaptor which is available at most electronic stores.
The smaller diameter wire needs to be connected to 12 volts. This
can be found in the wiring coming out of the back of the stereo. A
switched ignition source is preferred. Make sure the wire is
protected by a fuse.
Fitment
Compatible with the following vehicles:
Motorcycles
Cars
Trucks
Hot Rods
Boats
Campers
Golf Carts
ELIMINATE THAT
WHIP ANTENNA
GO FOR THAT SLEEK, CLEAN LOOK
EASY
INSTALLATION
FANTASTIC RECEPTION