VAG-COM Tacho 2.5 USB to OBD-II interface cable for VW, Audi,
Seat and Skoda (certain models - see specifications below). This
VAG-COM cable with software is an aftermarket tool for transmission
protocols with 16pin OBDII style data link connector that supports
VDO SEED-KEY protected dashboards.
This car diagnostics USB to 16PIN OBD-II cable allows you to
read/write EEPROM programming, read PIN codes for new key change
and update the millage of your car. Use your computer and this USB
enabled VAG-COM interface cable, and you will be able to instantly
modify certain settings and clear errors in your vehicle. With easy
installation of the software provided with this Tacho 2.5 USB
OBD-II cable, you can start self-troubleshooting your very own car,
and view results within minutes.
This model supports VDO SEED-KEY protected dashboards so you
can read the Immobilizer PIN code of your car without the need to
remove the dash panel. The VAG-COM Tacho 2.5 interface cable is
easily connectible to your vehicle through the OBD diagnostics
port. There is no doubt that this simple tool is very cost
effective, whether you are a mechanic or just a car owner.
At a Glance...
- VAG-COM Tacho 2.5 USB to OBD-II Interface Cable
- Supports VDO SEED-KEY protected dashboards
- Full featured diagnostic code analyzing software
- Primary Function: USB Vag-Com interface cable
- OBDII Plug: J1962 16-Pin Male (to Car)
- USB Port enabled
- Operating Software Compatibility: Windows 98SE / ME / 2000 / NT
and XP.
- Some Compatible Vehicle Models and Years++:
- Audi A4, A6, A8 with separate immobilizer box (1994-1999),
reads PIN and reads/writes EEPROM
- Audi A3, A4, A6, TT (1998-2002), reads PIN and corrects
mileage
- Audi (nearly all VDO dashboards) pre-2001 Reads/writes
EEPROM
- VW Beetle (New) Magneti Marelli M73 (1998-2002), reads PIN
& corrects mileage
- VW Beetle (New) Magneti Marelli M73 (2001-2005), reads PINs
- VW, Seat, Skoda (nearly all VDO dashboards) pre-2004
reads/writes EEPROM
- VW, Seat (nearly all MotoMeter dashboards) to 2001
reads/writes EEPROM
- Supports VDO SEED-KEY protected dashboards including the
following VW's and Skodas:
- Bora (to 2004)
- Golf 4 (to 2003)
- Jetta (to 2004)
- Passat B6
- Fabia (to 2004)
- Skoda Octavia/Fabia (to 2004)
- Also supports some Seat dashboards up to year 2004
- Dimension: L:154 (CM)
- Catalog Ref: Taxo 2.5, OBD2 cable, fault code cable, cable for
car diagnostics
-
Other Features
- No power supply needed, just connect to your car and
computer
- ++Note: Refer to your car user manual or check with your
vehicle manufacturer, dealer or local mechanic to verify that your
model is compliant
Package Contents
- Model: CVFG-A08 USB VAG-COM interface cable
- User CD Manual & Software - English
FAQ
- I get a warning message from Windows when I am installing the
software, should I be worried? No. The software should install and
work just fine.
- Do I need to have my car running while performing diagnostics?
Just the ignition, but for some tests you might require the engine
to be running.
Loading History...
Make an Offer
Ask a Question
Add to Cart
Loading...
