Item Description

CHEVY CAVALIER / S10 | 2.2 4 cyl. JDM SPORT T3/T4 TURBO KIT

 

  • 1x JDM sport Intercooler: tube and fin design, 31 x 11 x 3 inch cord size. 2.5inch in/outlet diameter, handles up to 30psi/500hp.
  • 8x universal piping: 2.5 inch diameters, customizable angles, lightweight design, and color maybe vary.
  • 6x rubber sealing couplers & x16 T-bolt clamps: 2.75 inch diameter couplers (colors may vary) with flexible steel T-bolt clamps for better and stronger holdings to prevent leaking.
  • 1x JDM sport T3/T4 Hybrid turbo w/ random filter: brand new built with 3inch diameter inlet, 2inch outlet, .50 A/R compressor, .63 A/R turbine .57 trim, and oil cooling system. 50+whp gain (est.)
  • 1x 2.2L Chevy Cavalier / S10 JDM Sport Black Cast Iron Turbo Manifold with T3/T4 Flange.
  • 1x JDM Type RS style Blow off valve w/ bov adapter piping: Quick response with high capacity Up To 1200HP or 25 PSI of Boost Pressure. Professional Installation Suggested. Kit comes with bolt flange and hardware. Adapter piping can be bolted on or weld on.
  • 1x 38mm tail style wastegate w/ hardware: wastegate body and valve are investment cast from 253MA Stainless Steel (ASTM S30815).It intended to withstand high temperature and flow capability. With Turbo Boost Controller you will able to Adjust Spring rate from 1-30 Psi) w/o Change Springs.
  • 1x Turbo Boost Controller: in order to avoid replacing wastegate springs, which only give a fixed increase (which is not adjustable), a boost controller will be the most cost effective solution. Boost controller allows adjustable boost psi settings, light weight design to be mounted under the hood. Hardware is included.
  • 1x JDM Oil Feed Line: designed to limits oil flow, prevent blown oil seal. 36 inch long with 3/8 diameter stainless steel line, hardware and gasket is included w/ 1/8 inch fittings for the engine.
  • 1x Adjustable fuel pressure regulator: Increase or decrease fuel pressure with vacuum signal for pressure preference. It is ideal for fixing lean idle or rich idle. Pressure Regulator made from light weight aluminum. (Upgraded high pressure fuel pump & Injectors recommended for turbo engine application for maximum performance).

Colors of components are subject to availability and may very; you may request a kit with Red or Blue components which are subject to availability.

 


 Professional Installation highly recommended, kit does not include instructions.Please allow 1 - 4 weeks for shipment. Fullers Custom Shop reserves the right to special order turbo kits and in certain cases back order or cancel orders due to non availability. On hand quantities may be sold through website decreasing available inventory. Out of country orders require additional shipping fees and will extend shipping times. See Terms and Conditions on our website for all policies. Actual product may very from photo.

 

www.fullerscustomshop.com