Item Description
Description
Item Specifics - Item Condition
Condition:

New


|
513087




1990 - 1997 Chevrolet GMC Oldsmobile
Blazer Pickup S10 T10 Jimmy S15 T15 Sanoma Typhoon Bravada
 Front Wheel Bearing and Hub NEW!

Up for auction is a front wheel bearing hub bearing for many GM General Motors vehicles. The unit is brand NEW in the box.

If your bearing is noisy and rubbing or squeeling and you needs replacement this is the deal for you. This bearing lists for over $340.00 and sold at the major wholesalers / retailers for $185.00. You can now purchase this hub assembly now at a fraction of its cost. Place your bid and you wont regret it.

This premium quality hub assembly is manufactured to OEM specifications and will directly replace your existing worn out unit. This OE replacement unit will provide years of trouble free service. Compare the item with your local parts store, dealer and ebay and realize the savings and value you will receive.

Part#:  513061
Part Type:  Front Wheel Bearing and Hub
The image “http://www.jjprc.com/ebay/513061-1.jpg” cannot be displayed, because it contains errors.
CHEVROLET (77) 1990-1997
  BLAZER S10 4x2 (9) 1990-1994

  BLAZER S10/T10 (3) 1995-1997

  BLAZER T10 4x4 (S10) (9) 1990-1994

  PICKUP S10 4x2 (21) 1990-1997

  PICKUP S10 SS 4x2 (6) 1994-1996

  PICKUP T10 4x4 (S10) (21) 1990-1997

  PICKUP T10 ZR2 4x4 (S10) (8) 1994-1997

GMC (43) 1990-1997
  JIMMY S15/T15 (11) 1990-1997

  PICKUP S15/T15 (3) 1990-1990

  PICKUP SONOMA (S15/T15) (20) 1991-1997

  PICKUP SONOMA SLS SPORT (6) 1994-1996

  PICKUP SYCLONE (T15) (1) 1991-1991

  TYPHOON (T15) (2) 1992-1993

OLDSMOBILE (7) 1991-1997
  BRAVADA (7) 1991-1997
    1997 V6-262ci 4.3L F/I Vin W
    1996 V6-262ci 4.3L F/I Vin W
    1994 V6-262ci 4.3L F/I Vin W
    1993 V6-262ci 4.3L F/I Vin Z
    1992 V6-262ci 4.3L F/I Vin Z
    1992 V6-262ci 4.3L F/I Vin W
    1991 V6-262ci 4.3L F/I Vin Z

Please review my shipping policy before bidding.

Front wheel bearing and hub will need replacement if your axle has worn through it. The bearing is mounted on the end of the driveshaft or axle and at times it runs hot. Although it contains a sealed bearing that needs no lubrication - over time due to heat it will deteriorate and wear out. The bearing is all self sealing and self lubricating so it should never need servicing. The bearing should be checked during regular brake inspection to be sure its not out of round and the ball bearings are not worn. Tie rod ends inner or outers are used by the suspension and steering systems it allows the car to steer the wheels. If its worn out the wheel alignment may suffer and the tire rod may pop out of its socket leaving you stranded when the wheel does the mean lean. Replace the tie rod inner and or outer and dont forget to get a wheel alignment. At the same time you may want to check the ball joints and wheel bearings or hub bearings. The control arms will sometimes need replacement when the bushings and the ball joint wear out. While you are at it you should check the rest of the suspension such as idler and pitman arms drag links tie rod sleeves upper and lower ball joints struts and shocks.


My open auction items are also listed in for immediate purchase.
Please use the "Submit Best Offer" link and submit your offer for my review.
Or click on the Buy it Now
link to purchase this item immediately.



Any questions please email me at NetAutoParts.  

ABOUT eBay Feedback
It is kindly requested that BEFORE leaving anything but a positive feedback that you attempt to contact me by email to resolve ANY issues.  I will make every effort to service your expectations.  Feedback is always provided to the ones that leave it.  Thank you for looking and good luck bidding. 
PARTS AVAILABILITY

I have available and in inventory Brake Rotors Drums Pads Shoes Calipers Wheel Cylinders Brake Hoses Complete Exhaust Systems Drive Axles Steering Racks Control Arm Ball Joint Tie Rod KYB and Monroe Shocks and Struts Strut Support Bearing Chemicals such as 134a Freon Antifreeze Engine Oil Oil Air and Fuel Filters by Wix Bosch and Champion Labs Starters Alternators Heater Core Radiator AC Compressor Condensor Receiver Drier Fuel Pump Water Pump Timing Belt Belt Tensioner Timing Kit Control Cables etcetera etcetera, basically a full line of parts for all Domestic and Imported Makes and Models.

If you can't find what you need, then click HERE to email me a parts request.

BUYERS please check the part to your satisfaction and be sure to yourself that it can be used in your application. The part number supplied is from the part itself or it's packaging.  It is presumed to be correct, and can be used as reference to suppliers and dealers.  ANY used electrical parts are sold "AS IS".  Any problem that should arise with used or new parts will be reviewed totally on it's own merits, otherwise there is NO implied warranty.  SELLER reserves the right to terminate this auction at any time.  All the auction items are also advertised locally for sale.

Note: Seller reserves the right to end any auction at anytime and for any reason.




On Sep-28-05 at 05:09:43 PDT, seller added the following information:

BidPay® — auction payments made easy
BidPay


On Sep-29-05 at 17:06:15 PDT, seller added the following information:
After purchasing, pay instantly with your credit card through PayPal!
VisaMasterCardDiscoverAmerican ExpresseCheck


On Oct-16-05 at 21:40:46 PDT, seller added the following information:This unit comes complete with the ABS ring and will fit your 4 x 4 vehicles. So if your ABS ring is damaged this will fix the problem.


On Jul-05-06 at 21:05:47 PDT, seller added the following information:


Powered by


On Sep-20-06 at 08:11:38 PDT, seller added the following information:

Pay for this online auction using BidPay® - Seller BidPay ID: netautoparts
BidPay
BidPay.com




00000